Start with the AIMS model number on the equipment label. Units with the same wattage can require different battery voltages and AC input, and their transfer switches may support different output configurations.
Match DC battery voltage and AC service
Check the product’s nominal DC battery voltage, AC input for charging or bypass, and AC output. A 120/240 V split-phase output does not establish that a unit accepts 120 V charging input. Use the wiring and installation instructions for the exact model. AIMS Global LF inverter chargers draw from the battery bank. To add solar, use a separate solar charge controller that suits the array and battery bank.
- PICOGLF4024120UL, 4 kW with a 24 V battery bank
- PICOGLF6024240SUL, 6 kW with a 24 V battery bank and split-phase output
- PICOGLF120W48V240VS, 12 kW with a 48 V battery bank and split-phase output
Match the battery and charger
The LFP24V400A is a 24 V-class, 400 Ah battery, while the LFP48V200A is a 48 V-class, 200 Ah battery. Each is rated for 10.24 kWh of nominal storage. Check the charging limits for the exact battery. For a golf cart, use the cart and motor-controller ratings, battery tray measurements, and the lithium-compatible charger supplied for the kit.
Compare the 105 Ah golf-cart kit and the 150 Ah golf-cart kit by tray fit, weight, and continuous current.
Get the right manual
Contact Prepper Hideout with the full model number, serial number or revision, and the manual or compatibility question you need answered. For a kit, include the labels from the inverter and battery separately.
Find your Global LF or LiFePO4 manual
The manuals are grouped by edition. Match the equipment model on the label. For a kit, record both the inverter and the battery model.
Global LF 1–6 kW owner’s manual (v9.0)
This edition is filed with the models below. Match the full SKU and the terminal layout to your unit. The specifications section distinguishes the DC input and AC configuration by model.
Open the Global LF 1–6 kW owner’s manual (v9.0) (PDF)
- PICOGLF40W12V120V
- PICOGLF60W24V240VS
- PICOGLF15W12V120VR
- PICOGLF20W12V120VR
- PICOGLF30W12V120VR
- PICOGLF4012120240VS
- PICOGLF40W12V240VS
- PICOGLF20W24V120VR
- PICOGLF30W24V120VR
- PICOGLF40W24V120V
- PICOGLF20W48V120VR
- PICOGLF40W48V240VS
- PICOGLF60W48V120V
- PICOGLF60W48V240VS
Global LF 4 and 6 kW UL 1741 owner’s manual (v2.0)
This edition lists the 24 V battery-bank models below. The four inverter model numbers distinguish wattage and 120 V versus 120/240 V output. For a kit, confirm the inverter label before using the corresponding AC diagram.
Open the Global LF 4 and 6 kW UL 1741 owner’s manual (v2.0) (PDF)
- KITC-6K24120 · 6 kW, 120 V output
- KITC-6K24240 · 6 kW, 120/240 V output
- PICOGLF4024120UL
- PICOGLF4024240SUL
- PICOGLF6024120UL
- PICOGLF6024240SUL
Global LF 8 and 12 kW UL 1741 owner’s manual (v3.0)
The PICOGLF80W48V240VS and PICOGLF120W48V240VS both use a 48 V-class battery bank and have 120/240 V split-phase output. Match the power rating and nameplate before you use the wiring diagrams.
Open the Global LF 8 and 12 kW UL 1741 owner’s manual (v3.0) (PDF)
LFP24V400A and LFP48V200A battery manual (v1.0)
Both packs are rated 10.24 kWh. The LFP24V400A is rated 25.6 V nominal and 400 Ah, with a rated charge voltage of 28 V. The LFP48V200A is rated 51.2 V nominal and 200 Ah, with a rated charge voltage of 56 V. AIMS lists a 32–113°F charging range for both. Confirm charger settings against the label and manual for your battery revision.
Open the LFP24V400A and LFP48V200A battery manual (v1.0) (PDF)
- LFP48V200A
- KITC-12K48240 · 12 kW, 48 V battery bank
- KITC-6K24120 · 6 kW, 120 V output
- KITC-6K24240 · 6 kW, 120/240 V output
- KITC-8K48240 · 8 kW, 48 V battery bank
AIMS hybrid inverter and high-voltage battery cabinet
The PIHY4600 hybrid kit includes an AIMS high-voltage cabinet rated 230.4 V DC and 96 Ah. Its cabinet and battery communications differ from the 48 V-class battery bank used by the PICOGLF120W48V240VS. For the PIHY kit, confirm both model labels and the maximum PV voltage and current with your installer.
LFP230V96A cabinet documentation
The 230.4 V DC, 96 Ah cabinet family uses a master cabinet with an optional expansion cabinet. AIMS lists up to two expansion cabinets with a master. Confirm the hardware revision, communications and site requirements with your installer before ordering.
LFP230V96A-M and LFP230V96A-S cabinet instructions (PDF) · PIHY4600 and PIHY9600 inverter manual (PDF)
AIMS inverter, battery and mounting manuals
Match both the DC input and AC output on the nameplate. The 12 V modified sine units, Global LF inverter-chargers, industrial pure sine units and negative 48 V rack equipment require different electrical configurations.
PWRINV8KW12V · 8 kW modified sine
This inverter uses 12 V DC and provides 120 V AC. Check load waveform compatibility and the battery bank’s discharge capability.
Global LF 1.5, 2 and 3 kW inverter-chargers
These listings use the 12 V DC and 120 V AC Global LF inverter-charger family. Check the table for the exact wattage and transfer requirements.
PICOGLF15W12V120V · PICOGLF20W12V120V · PICOGLF30W12V120V
PWRINV500012W · 5 kW 12 V modified sine
Use the 12 V model row. The manual also covers versions using other DC battery voltages.
PWRINV5K24012W · 5 kW with 240 V output
This model takes 12 V DC and provides 240 V AC. Check the load voltage before choosing it.
PICOGLF3K12050BY · 3 kW inverter-charger with bypass
Use the manual for the BY model when checking which output is available in inverter mode and which loads can use the transfer bypass.
Industrial pure sine inverters · 24 V and 48 V models
Both listed 5 kW models provide 120 V AC. Choose the 24 V or 48 V input model that matches your battery bank. The manufacturer’s two files have identical contents.
PWRIG500024120S · PWRIG500048120S
PRM2KWN48120S · negative 48 V rack inverter
Check polarity and the site’s DC architecture. Use the negative 48 V model table and confirm that the AC output suits your equipment.
KIT-GLF105 · golf cart battery and charger
The battery section of the kit uses the LFPGLF105A 48 V-class, 105 Ah battery. Check the cart’s voltage, battery tray dimensions and current requirements before ordering.
PWRINV10KW12V · 10 kW modified sine
This inverter uses 12 V DC and provides 120 V AC. Verify the continuous and startup load and the required DC current.
PV6X250RACK · ground-mount rack
The original manual covers both PV6X120RACK and PV6X250RACK. Match frame dimensions, clamp locations and site requirements for the larger rack before ordering.