Start with the fuel you intend to use and the chimney and floor protection your installation requires. The two Generation 2 packages differ in the hardware supplied.
Compare the wood and pellet configurations
The Generation 2 with the pellet hopper includes a gravity-feed hopper for approved pellets. The Generation 2 without the hopper is a separate package. Check the manual for the approved fuel and any conversion procedure. Burn time depends on fuel and how the heater is operated.
Measure the installation
Allow space for the heater and hopper as well as required clearances, floor protection, service access, and the flue route. Have an installer verify the model documentation, local requirements, and any limitations on the intended use. The RMH-2 measures 20 inches wide by 26 inches deep. Height is 36.5 inches without the hopper and 45 inches with it. These are equipment dimensions. Use the manual and your installer’s site review to determine the required clearances.
Request model instructions
For the current Generation 2 instructions or help identifying replacement parts, contact Prepper Hideout with the model and the configuration you plan to use.
Find the current RMH-2 manual below.
Liberator Generation 2 owner’s manual
Use the current RMH-2 manual to verify the approved fuel, chimney and floor protection for your installation. Check the hopper configuration on your equipment.
RMH-2 with pellet hopper
The manufacturer’s document opens in a viewer. Contact Prepper Hideout with your equipment label if you need help identifying the applicable edition.